Industrial Energy Efficiency-Cambodia (IEEC)
Page 2 of 9
Brick Kiln Sector:
- Modification of existing kilns by optimizing combustion, improving draft, insulation and avoiding short circuiting to reduce thermal energy losses.
- Replacement of kiln with energy efficient kiln like Fixed Chimney Bull Trench Kiln (BTK) and/or feasibility of continuous production Vertical Shaft Brick Kilns (VSBK) using biomass as fuel.
- Substitution of diesel used as fuel for electricity generation for mixing and brick molding section with producer gas using biomass based gasifiers.
Food Sector:
- Substitution of Diesel Generators used DO as fuel for electricity generation by replacing DO generators with duel fuel (70% gas & 30% DO)
- Replacement of DG set with 100% Gas fired Engines.
- Replacement of DO fired Dryers/Crispers with hot air dryer using producer gas.
- Installation of appropriate size of Gasifier based on waste wood or other locally available agro residue depending on location and space available.
- Substitution of inefficient piston type compressors with EE Screw compressor.
- Collection reuses and recycles of hot water and condensate from various sources.
Rice Milling Sector:
- Substitution of Diesel Engines used as driver for milling equipments by replacing duel fuel engines (70% gas & 30% DO).
- Replacement Engine with 100% gas based engines.
- Replacement of paddy dryer using fossil fuel with hot air dryer using rice husk or producer gas from gasifiers.
- Installation of appropriate size of Gasifier based on rice husk.
- Implementation of EE rice milling technology using separate motors for different equipment to reduce high energy loss from single drive engine.
- Installation of compact rice milling line.
Garment Sector:
- Substitution of Diesel used as fuel for captive Electricity generation
- Substitution of Furnace oil or Diesel used as fuel for steam generation in boilers by replacing solid fuel fired boilers using available surplus biomass.
- Replacement of wet processing machine (Washing/bleaching/dyeing) with low cloth: liquor ratio machine to reduce energy as well as other resource cons. and reduced waste water generation.
- Substitution of inefficient piston type compressors with EE Screw compressors.
- Substitution of inefficient dryers both mechanical (centrifuge) and thermal vertical front loading dyer using steam with EE squeezers and dryers.
- Collection, reuse and recycle of hot water and condensate from various sources.
- Optimizing lighting in production hall by replacing existing lights with EE lights, adjusting light proximity, install automatic control systems.
- Installation of Capacitor bank to improve power factor.